* EPP molded wing, built-in CF spar for enhancement, light, flexible and crash-resistant.
* Straight wing instead of an anhedral wing to get more stable and agile attitude.
* Updated SunnySky motor with a longer shaft, compatible with regular propellers.
* Updated 9g servos from plastic gear to metal gear.
* Updated ESC from 30A with 5V 1A Linear BEC to 30A with 5V 2A Switch BEC.
* Detachable main wing and tail wing for easy transport, easy to install. Improve connections for better aileron and tails stability
* Bigger NACA air-inlet provides more air cooling for FPV gear inside the fuselage.
* Built-in carbon fiber spar and extended plywood inside the fuselage for more strength in case of an impact.
* Optional belly mapping camera bay and camera mount for mapping.
* Texture marked on both sides of fuselage for a more secure hand launch grip.
* Optional Tefl0n cover for fuselage bottom, super durable, protecting the fuselage bottom from scratches on landing.
Introduce about FPV READY: Nano Talon EVO plane PNP with ZOHD Kopilot Lite Flight Controller and ZOHD VC400 All-in-one Video Camera (CP Antenna).
Description of VC400 PIGGYBACK AIO NTSC FPV Camera (CP Antenna):
Input voltage: 7-28V
Frequency band: 5.8GHZ
Video format: NTSC
Camera resolution: 600TVL
Antenna connector: Clover / Dipole
Field of View: 120 degrees
Size: 24*15*10mm
Weight: 8g
Output power: 0.1mW / 25mW / 200mW / 400mW
Operating current: 90mA (0.1mW) 150mA (25mW) 270mA (200mW) 360mA (400mW)
Product Weight: 8g
Product Size(L x W x H): 24 x 15 x 10mm
Features:
* 3-in-1 AIO integrated design, with camera, VTx and antenna, ultra-light weight and small size, best solution for light-weight airplanes.
* With OSD to show Power-on time and Input Voltage, so you can know how long you can keep flying.
* Default JST plug and up to 25cm power cable, longer enough for most small size airplanes.
* Up to 2.5km video transmission ra nge on 400mW.
* Wide voltage input from 7-28V, safe for all kinds of battery or BEC input.
* With customized ve1cro strap to hold the camera and EVA foam for anti-vibration.
* Switchable between 0.1mW / 25mW / 200mW / 400mW.
* Optional Clover / Dipole antenna for different airframes and flight mode (for straight line flights or flying around).
* 5.8Ghz VTx with 40 racing channels.
* Allows you to display customized Call Signs.
* Power cable were soldering and fixed by silica glue, solid even in a crash.
Package Included:
1 X VC400 AIO Camera with Lens Cover
1 X Customized Ve1cro Strap
2 X EVA Anti-vibration Foams
1 X Manual
Description of Kopilot Lite Autopilot System:
Supported planes: T-tail, V-Tail, Flying Wing/ De1ta Wing.
Supported receiver: PWM, PPM, S-Bus.
Supported mode: Home(RTH), Fence (RAD), Stabilization modes.
Servo connector: 4 connectors
Operation temperature: -10℃-50℃
Package Weight: 83g
Package Size (L x W x H):113 x 84 x 29mm
Features:
* Easy installation, minimal wiring. Super easy setup.
* Powerful stabilization and RTH algorithm.
* Return to Home (RTH) Fence (RAD) and Stabilization modes on a 3 position switch.
* Supports T-Tail, V-Tail and Flying Wing/ De1ta configurations.
* Mini-size GPS unit for ultra-light setups.
* Fast SAT lock.
* Adjustment board removable for a light-weight setup.
* Launch assistant and motor blocking for no SAT fix.
* AIL, ELE, THR, RUD + AUX to control your servs. Landing gear and flaps go straight to RX.
* Computer-free programming.
* Easy to transfer between planes.
* Completely transparent. Switch it off and use it as a mixing board only.
Package Included:
1 X Kopilot Mainboard
1 X Mounting Support
1 X GPS
1 X Adjustment Board
1 X Double-side Tape
1 X Screw Driver
1 X Manual
PNP Included:
1X Nano Talon EVO plane PNP with pre-installed motor, esc, servos, propeller, hardware.
FPV Ready Inccluded:
1x Nano Talon EVO plane PNP with pre-installed motor, esc, servos, propeller, hardware
1x ZOHD Kopilot Lite
1x ZOHD VC400 All-in-one Video Camera